Transparency & verification

Calculation Methodology & Data Sources

Last updated: 2026-11-18

1. Scope and boundaries

Sylvaix fence calculators produce deterministic material quantities and preliminary material cost ranges for residential wood fences in the United States. They do not replace a site survey, structural engineering, utility locates, permits, or a licensed contractor's judgment. Gate framing, frost-depth design, wind uplift, soil bearing, and HOA approval are outside the model.

2. Formulas

Wood fence
Effective length = total length − (gates × gate width)
Sections = gates + 1
Bays per section = ceil(effective length ÷ sections ÷ post spacing)
Posts = (bays per section × sections) + sections + corners
Rails = bays × rails per bay
Pickets = ceil(effective length × 12 ÷ (picket width + gap))
Shadow box pickets = 2 × standard pickets
Horizontal fence
Bays = ceil(effective length ÷ post spacing) per section
Rows = ceil(height × 12 ÷ (slat width + gap))
Boards = ceil(rows × bays × (1 + waste))
Battens = bays when the center stiffener is enabled
Concrete
Hole volume = π × (diameter ÷ 24)² × fill depth ÷ 12
Post volume = (post width ÷ 12)² × fill depth ÷ 12
Bags = ceil(posts × net volume × (1 + overage) ÷ bag yield)

3. Default assumptions

ParameterDefaultNotes
Lumber actual sizes4×4 = 3.5 in; 2×4 = 1.5 × 3.5 in; 1×6 = 5.5 inNominal sizes differ from actual dimensions.
Concrete bag yield80 lb ≈ 0.60 ft³; 60 lb ≈ 0.45 ft³; 50 lb ≈ 0.375 ft³Check the bag; product and brand vary.
Material waste10% (adjustable 0–50%)Covers cuts, defects, and miscuts.
Concrete overage10% (adjustable 0–50%)Rounded up to whole bags.
Gate modelGates divide the run into equal sectionsConservative; adjust for uneven gate positions.
Corner modelOne terminal post per 90° cornerDoes not engineer the corner connection.

4. Public sources

Sources are listed with the specific use and access date. Links open the publisher's page; standards and code documents may require a free account or purchase.

SourceUsed forAccessed
Voluntary Product Standard PS 20 — American Softwood Lumber StandardNISTNominal vs. actual lumber dimensions (4×4 = 3.5 in; 2×4 = 1.5 × 3.5 in; 1×6 = 5.5 in).2026-11-18
American Wood Council — span tables and wood construction guidanceAWCWood framing context and post/rail sizing assumptions.2026-11-18
Estimating Bagged Concrete JobsSAKRETE80 lb bag yield (about 0.60 ft³) and 10% overage guidance. The 60 lb and 50 lb figures are derived at the same yield ratio — confirm the stated yield on the bag.2026-11-18
Occupational Employment and Wage Statistics (OEWS)U.S. Bureau of Labor StatisticsState and metro wage reference for carpenter and construction laborer occupations.2026-11-18
Producer Price Indexes (PPI) — lumber and wood productsU.S. Bureau of Labor StatisticsMaterial price trend context; not a retail price source.2026-11-18
Regional Price Parities by State and Metro AreaU.S. Bureau of Economic AnalysisState-level price-level multipliers for future local cost estimates.2026-11-18
Fence — Conservation Practice Standard 382USDA Natural Resources Conservation ServiceAgricultural fence post spacing and wire spacing reference.2026-11-18
International Residential Code / local building codesUpCodesCode lookup starting point. Local building departments control frost depth, height limits, and permits.2026-11-18
American Fence AssociationAFAIndustry context and contractor directory reference.2026-11-18

5. Limitations

  • Frost depth, height limits, setbacks, and permits are controlled by local code.
  • Wind exposure, soil bearing, and post sizing are not engineered.
  • Gate framing, hinges, latches, and diagonal bracing are not designed.
  • Board count assumes one board per row per bay for horizontal fences.
  • Material prices are illustrative defaults; edit them to your local store.
  • Concrete bag yield varies by product; verify the bag and round up.

6. How to verify a result

  1. Check the formula and units shown on the calculator page.
  2. Recompute one row by hand or in a spreadsheet.
  3. Compare concrete bags with the yield printed on your bag for the same hole size.
  4. Compare material quantities with the product coverage printed on the bag or board.
  5. If your result differs by more than 1–2 units, check hole size, fill depth, waste, or rounding assumptions.

7. Changelog

2026-11-18: Published Astro rebuild with shared calculator engine, corrected gate-post model, separated concrete fill depth from total hole depth, added print styles, mobile result summary, and source links.

8. Contact and corrections

If you find a formula error or a regional code nuance, check the source table above and note the calculator, inputs, expected result, and a reference. A message channel will be published on the contact page when available.