Direct answer: 100 ft, 6 ft privacy fence
What makes a fence a privacy fence
A privacy fence is a solid, view-blocking fence — usually vertical wood pickets 5.5 in wide with a small gap, set 6 ft high. At a 0.25 in gap, the pickets cover roughly 96% of the fence face, which is what separates a privacy fence from a decorative picket fence with 2–4 in gaps. Height does the rest: a 6 ft fence hides most standing sightlines, while a 4 ft fence mainly marks a boundary.
This calculator sizes the classic wood privacy fence: pressure-treated 4×4 posts, 2×4 rails, and 1×6 pickets, either standard single-face or shadow box (board-on-board). Vinyl, composite, and aluminum privacy systems use panel-based construction and different waste factors, so treat those as separate estimates.
Privacy fence cost per linear foot
The table compares the two wood privacy styles at 100 ft, using this calculator's default planning prices. Duplicate pickets are the main reason shadow box costs more; rails and posts stay roughly the same.
| Style (100 ft, 6 ft high) | Pickets ordered | Concrete bags | Materials total | Per linear foot |
|---|---|---|---|---|
| Standard vertical (1×) | 230 | 35 | $1,442–$1,755 | $14.42–$17.55 |
| Shadow box (2×) | 460 | 35 | $2,228–$2,712 | $22.28–$27.12 |
These are material-only numbers with a fixed ±8–12% sensitivity band; labor, permits, sales tax, equipment, gate construction, and old-fence removal are excluded. Installed privacy fence cost is commonly a multiple of the material total, but the multiplier varies a lot by region and site conditions — get two or three local quotes before budgeting. Edit the unit prices in the calculator to match your store.
Pickets, posts, rails, and concrete by fence length
Standard privacy fence quantities at 6 ft height, 8 ft post spacing, 5.5 in pickets, 0.25 in gap, and 10% material waste. Rails use 3 per bay; adjust to your framing plan. Concrete is 10 in holes with 30 in fill and 10% overage.
| Fence length | 4×4 posts | 2×4 rails | Pickets (net) | Pickets (order) | Concrete bags |
|---|---|---|---|---|---|
| 50 ft | 8 | 21 | 105 | 116 | 20 |
| 100 ft | 14 | 39 | 209 | 230 | 35 |
| 150 ft | 20 | 57 | 314 | 346 | 50 |
| 200 ft | 26 | 75 | 418 | 460 | 65 |
Every extra gate splits the fence into another section and adds two gate posts. Each 90° corner adds one terminal post. Use the calculator above for gates, corners, custom spacing, and your own prices.
Shadow box vs. standard for privacy
Both styles block a direct view, but they fail differently. A standard single-face fence with pickets butted or nearly butted is the most solid option; as the boards dry and shrink you get thin gaps that you can close by spacing pickets slightly tighter at install. Shadow box alternates pickets on both faces, so the two layers hide straight-line sightlines well and the fence looks finished from both sides — at the cost of double pickets and more edges for the wind to catch.
If privacy is the only goal, standard with minimal gaps wins on cost. If the neighbor-facing side matters — a shared boundary, a corner lot, an HOA that requires a finished look — shadow box is usually worth the picket count. This calculator models standard alternating board-on-board construction at 2× pickets; wider boards, overlap, or other gap patterns change the count. Either way, keep post spacing at 8 ft or less and plan on burying about one-third of the post length — local code, soil, wind exposure, and product instructions control the final depth, especially below the local frost line.
Height limits, HOA rules, and post footings
Six feet is the common residential cap, but front-yard limits are often lower (4 ft) and taller fences may need a permit, engineering, or neighbor agreement. HOAs frequently restrict height, style, and material, and some prohibit shadow box. Check the rules before you order; a rejected fence is expensive to rework.
A 6 ft privacy fence typically uses 8 ft posts with 24–30 in below grade, extended below the local frost line in cold climates. Add 4–6 in of gravel at each hole bottom, then pour concrete to the fill depth — the calculator asks for fill depth, not total hole depth. Call 811 before digging, and see the methodology page for formulas and sources.
Frequently Asked Questions
How much does a 6-foot privacy fence cost per foot?
Materials for a standard 6 ft wood privacy fence run about $14.42–$17.55 per linear foot at the default prices in this calculator, or roughly $1,442–$1,755 for 100 ft. Shadow box roughly doubles the picket count and comes to about $22.28–$27.12 per foot. These are material-only planning numbers that exclude labor, permits, and tax; installed cost is typically a multiple of the material total and varies by region, so get local quotes before budgeting.
How many pickets do I need for a 100 ft privacy fence?
A 6 ft standard privacy fence with 5.5 in pickets and a 0.25 in gap needs 209 net pickets over 100 ft. With a 10% waste allowance, order 230. A shadow box fence doubles the picket layers: 418 net or 460 with waste.
Is a shadow box fence good for privacy?
Shadow box (board-on-board) staggers pickets on both faces of the fence. It blocks most straight-line views and looks good from both sides, but the alternating boards leave more small gaps than a single face with butted pickets. For maximum privacy, use a standard single-face fence with tight or butted pickets and let the boards shrink over time. Shadow box costs roughly twice as much in pickets.
How many posts and bags of concrete for a 100 ft privacy fence?
At 8 ft post spacing, a straight 100 ft 6 ft privacy fence needs 14 4×4 posts. With 10 in diameter holes and a 30 in concrete fill, that is 35 bags of 80 lb concrete including a 10% overage. Enter the concrete fill depth, not the full hole depth, if you add a gravel base.
How tall can a privacy fence be?
Six feet is the most common residential privacy fence height, and many jurisdictions allow up to 6 ft in back yards with 4 ft limits in front. Heights of 7–8 ft often require a permit, engineered posts, or neighbor consent, and HOAs may restrict height, style, and material. Always confirm the limit with your local building department and HOA before ordering materials.
Does the privacy fence calculator include gates?
Yes, as a conservative allowance. Enter the number of gates and the calculator subtracts each gate opening from the fence length and adds two gate posts per gate. Gate frames, hinges, latches, and diagonal bracing are not included in the material list — plan gate construction separately based on gate width and weight.